I rechecked everything and removed the irq from
the module option line and now all works great...
I just had a lot of missteps setting it up.  Now
I am trying to set up the printing to go to the 
print server in the broadband router. Info out in 
manuals is sparse.

Joe
--- Patrick Fleming <pfleming@infomagic.net> wrote:
> 
> On Thu, 18 Oct 2001, jtannenba wrote:
> 
> > Ok, yes, I recompiled the tulip.c file that came
> on
> > the floppy with the card.
> > Same error.
> And copied the resulting tulip.o file to 
> /lib/modules/{version}/kernel/drivers/net/tulip/
> 
> Here's what my
> /etc/sysconfig/network-scripts/ifcfg-eth0 file looks
> like:
> 
> DEVICE=eth0
> BOOTPROTO=static
> BROADCAST=
> IPADDR=192.168.1.1
> NETMASK=255.255.255.0
> NETWORK=192.168.1.0
> ONBOOT=yes
> 
> 
> > No ifconfig does not show eth0
> > The messages file did not show an error.
> > the modprobe tulip.o said 'invalid irq'
> > and the documentation says what I have in
> > /proc/pci shows my pci mb setup is wrong?? It is
> 
> Not sure what you mean by the docs show that
> /proc/pci is wrong.
> 
> > all automatic. (set to auto)????
> > Joe
> > --- Patrick Fleming <pfleming@infomagic.net>
> wrote:
> > > 
> > > Did you compile the tulip driver yourself? What
> does
> > > /var/log/messages
> > > indicate? Do you have the file
> > > /etc/sysconfig/network-scripts/ifcfg-eth0 ?
> > > 
> > > Patrick
> > > 
> > > On Mon, 15 Oct 2001, jtannenba wrote:
> > > 
> > > > Hi all,
> > > >
> > > > Finally got broadband and am getting off of a
> > > dialup
> > > > modem..
> > > >
> > > > Problem, have a Linksys lne100tx pci card and
> put
> > > it
> > > > in the box.  Windows works fine.
> > > >
> > > > My Redhat 6.1, however, found  a card but
> didn't
> > > > recognize what kind.
> > > >
> > > > I did the config asked by the Readme.txt file
> > > (uses
> > > > the
> > > > tulip.o driver), but when I go to activate
> eth0,
> > > > it says 'delaying eth0 initialization.'  I am
> out
> > > of
> > > > ideas.  An ifconfig does not show eth0 either.
> > > >
> > > > Joe
> > > >
> > > > =====
> > > > JT and NE Tannenbaum
> > > > jtannenba@yahoo.com
> > > >
> ________________________________________________
> > > > See
> http://PLUG.phoenix.az.us/navigator-mail.shtml
> > > if your mail doesn't post to the list quickly
> and
> > > you use Netscape to write mail.
> > > >
> > > > PLUG-discuss mailing list  - 
> > > PLUG-discuss@lists.PLUG.phoenix.az.us
> > > >
> > >
> >
>
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > > >
> > > 
> > > ________________________________________________
> > > See
> http://PLUG.phoenix.az.us/navigator-mail.shtml
> > > if your mail doesn't post to the list quickly
> and
> > > you use Netscape to write mail.
> > > 
> > > PLUG-discuss mailing list  - 
> > > PLUG-discuss@lists.PLUG.phoenix.az.us
> > >
> >
>
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > 
> > 
> > =====
> > JT and NE Tannenbaum
> > jtannenba@yahoo.com
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml
> if your mail doesn't post to the list quickly and
> you use Netscape to write mail.
> > 
> > PLUG-discuss mailing list  - 
> PLUG-discuss@lists.PLUG.phoenix.az.us
> >
>
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > 
> 
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml
> if your mail doesn't post to the list quickly and
> you use Netscape to write mail.
> 
> PLUG-discuss mailing list  - 
> PLUG-discuss@lists.PLUG.phoenix.az.us
>
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss


=====
JT and NE Tannenbaum
jtannenba@yahoo.com