I believe that my camera needs to be seen as sda1. I read this on a webpage trying to get my camera working. The main thing that causes me to believe this site is that after I put my camera in I started to get an error message in terminals and if I type dmesg <1>. sda1 is a SCSI hd and it is my swap drive. How do I force it to be seen as sdb? <1> bmike1@5[bmike1]$ dmesg not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING floppy0: data CRC error: track 32, head 1, sector 18, size 2 floppy0: data CRC error: track 32, head 1, sector 18, size 2 end_request: I/O error, dev 02:00 (floppy), sector 1187 floppy0: data CRC error: track 33, head 1, sector 9, size 2 floppy0: data CRC error: track 33, head 1, sector 9, size 2 end_request: I/O error, dev 02:00 (floppy), sector 1214 floppy0: data CRC error: track 32, head 1, sector 18, size 2 floppy0: data CRC error: track 32, head 1, sector 18, size 2 end_request: I/O error, dev 02:00 (floppy), sector 1187 scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x8 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING ABORTED IN=ppp0 OUT= MAC= SRC=69.56.218.11 DST=67.219.169.114 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=31943 DF PROTO=TCP SPT=80 DPT=3260 SEQ=2407638351 ACK=0 WINDOW=0 RES=0x00 RST URGP=0 scsi1: PCI error Interrupt at seqaddr = 0x9 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING scsi1: PCI error Interrupt at seqaddr = 0x7 scsi1: Data Parity Error Detected during address or write data phase scsi1: WARNING WARNING WARNING WARNING scsi1: Too many PCI parity errors observed as a target. scsi1: Some device on this bus is generating bad parity. scsi1: This is an error *observed by*, not *generated by*, this controller. scsi1: PCI parity error checking has been disabled. scsi1: WARNING WARNING WARNING WARNING bmike1@5[bmike1]$ This message has been scanned for viruses by the VEI Internet Automatic Email Spam and Virus Scanner, and is believed to be free of spam or viruses. Please report spam to spamtrap@vei.net. If you would like 98.9 % spam blocked from your E-mail then go to VEI Internet for details. Anti-spam/Anti-virus is FREE with every account. http://www.vei.net/ mailtospamtrap@vei.net --------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change you mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss