On Sat, Mar 31, 2012 at 11:38 AM, Michael Havens wrote: > >You don't need openssh-server, it's already installed. > > What does it mean when it says 'set to manually installed' when I type in > 'apt-get install openssh-server'? > That means you "manually installed it". > > and then tried to install openssh-server. Well I guess it kinda worked. >>> I think it installed ssh-server because when I type in apt-get install >>> ssh-server it says: >>> >>> openssh-server is already the newest version. >>> openssh-server set to manually installed. >>> >> > >> >>> but when I try ssh: >>> >>> sudo ssh 192.168.0.4 >>> root@192.168.0.4's password: <-laptop >>> Welcome to Linux Mint 12 Lisa (GNU/Linux 3.0.0-12-generic i686) >>> >>> Welcome to Linux Mint >>> * Documentation: http://www.linuxmint.com >>> >>> Last login: Wed Mar 28 16:20:36 2012 >>> Michaels-Laptop ~ # ssh 192.168.0.2 <----------------------------- >>> computer in question >>> ssh: connect to host 192.168.0.2 port 22: No route to host >>> >> >> Michael, in Linux troubleshooting, "the error is the answer". So that >> means there is NO ROUTE TO HOST. >> Is the machine on the same network? >> >> # traceroute 192.168.0.4 >> # ping 192.168.0.4 >> > > Yes, they are in the same network. /24. > Michaels-Laptop ~ # traceroute 192.168.0.3 > traceroute to 192.168.0.3 (192.168.0.3), 30 hops max, 60 byte packets > 1 * * * > ... > 30 * * * > Michaels-Laptop ~ # ping 192.168.0.3 > PING 192.168.0.3 (192.168.0.3) 56(84) bytes of data. > 64 bytes from 192.168.0.3: icmp_req=1 ttl=64 time=1.70 ms > ^C > --- 192.168.0.3 ping statistics --- > 5 packets transmitted, 5 received, 0% packet loss, time 4005ms > rtt min/avg/max/mdev = 1.422/1.551/1.722/0.135 ms > Michaels-Laptop ~ # ip addr show > 1: lo: mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: mtu 1500 qdisc pfifo_fast > state DOWN qlen 1000 > link/ether 44:1e:a1:c8:89:4b brd ff:ff:ff:ff:ff:ff > 3: wlan0: mtu 1500 qdisc mq state UP > qlen 1000 > link/ether 94:39:e5:11:b8:84 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.4/24 brd 192.168.0.255 scope global wlan0 > inet6 fe80::9639:e5ff:fe11:b884/64 scope link > valid_lft forever preferred_lft forever > Michaels-Laptop ~ # > bmike1@Michaels-PC:~$ traceroute 192.168.0.4 > traceroute to 192.168.0.4 (192.168.0.4), 30 hops max, 60 byte packets > 1 Michaels-Laptop (192.168.0.4) 1.693 ms 1.623 ms 2.344 ms > bmike1@Michaels-PC:~$ ping 192.168.0.4 > PING 192.168.0.4 (192.168.0.4) 56(84) bytes of data. > ^C > --- 192.168.0.4 ping statistics --- > 5 packets transmitted, 5 received, 0% packet loss, time 4006ms > rtt min/avg/max/mdev = 1.421/1.662/2.175/0.267 ms > bmike1@Michaels-PC:~$ ip addr show > 1: lo: mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: mtu 1500 qdisc pfifo_fast state > UP qlen 1000 > link/ether 00:09:6b:78:ab:f0 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.3/24 brd 192.168.0.255 scope global eth0 > inet6 fe80::209:6bff:fe78:abf0/64 scope link > valid_lft forever preferred_lft forever > bmike1@Michaels-PC:~$ > Mike it looks like one of you systems is on the wireless and the other on the Wired. Can you run on both servers: # apt-get install nmap Then on each server: # nmap -PN 192.168.0.3 # nmap -PN 192.168.0.4 and post that? > > >>> >> Michaels-Laptop ~ # >>> The synaptic report is at 'a'. >>> >>> >>> bmike1@Michaels-PC:~$ /etc/init.d/sshd start >>> bash: /etc/init.d/sshd: No such file or directory >>> bmike1@Michaels-PC:~$ ssh localhost >>> ssh: connect to host localhost port 22: Connection refused >>> bmike1@Michaels-PC:~$ >>> >> >> # cd /etc/init.d/ >> # ls -al ssh* >> >> It's called /etc/init.d/ssh in Ubuntu >> https://help.ubuntu.com/10.04/serverguide/C/openssh-server.html >> > > bmike1@Michaels-PC:~$ cd /etc/init.d/ > bmike1@Michaels-PC:/etc/init.d$ ls -al ssh* > -rwxr-xr-x 1 root root 4194 2011-07-29 09:02 ssh > bmike1@Michaels-PC:/etc/init.d$ cd ssh > bash: cd: ssh: Not a directory > bmike1@Michaels-PC:/etc/init.d$ sudo ssh start > [sudo] password for bmike1: sat for five minutes > ^Cbmike1@Michaels-PC:/etc/init.d$ > Okay that's possibly a path issue. if you are in the directory you would enter: # sudo ./ssh start otherwise # sudo /etc/init.d/ssh start > > why did the sound stop working? > > >>Another problem that just started is the sound on the print server > stopped working. I clicked on the speaker icon >>to turn it up and I see it > is maxed. So then I clicked 'sound settings' and the output volume is maxed > so I >>investigate the tabs. The first tab (hardware) has nothing in the > 'choose a device to configure' window. So >>somehow the driver was removed > (I guess). > > Which distro? -- (503) 754-4452 Android (623) 239-3392 Skype (623) 688-3392 Google Voice ** it-clowns.com