good thinking yet alas! everything worked out ok.

 $ sudo memtester 1024 5
[sudo] password for bmike1: 
memtester version 4.3.0 (64-bit)
Copyright (C) 2001-2012 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).

pagesize is 4096
pagesizemask is 0xfffffffffffff000
want 1024MB (1073741824 bytes)
got  1024MB (1073741824 bytes), trying mlock ...locked.
Loop 1/5:
  Stuck Address       : ok         
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok         
  Block Sequential    : ok         
  Checkerboard        : ok         
  Bit Spread          : ok         
  Bit Flip            : ok         
  Walking Ones        : ok         
  Walking Zeroes      : ok         
  8-bit Writes        : ok
  16-bit Writes       : ok

Loop 2/5:
  Stuck Address       : ok         
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok         
  Block Sequential    : ok         
  Checkerboard        : ok         
  Bit Spread          : ok         
  Bit Flip            : ok         
  Walking Ones        : ok         
  Walking Zeroes      : ok         
  8-bit Writes        : ok
  16-bit Writes       : ok

Loop 3/5:
  Stuck Address       : ok         
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok         
  Block Sequential    : ok         
  Checkerboard        : ok         
  Bit Spread          : ok         
  Bit Flip            : ok         
  Walking Ones        : ok         
  Walking Zeroes      : ok         
  8-bit Writes        : ok
  16-bit Writes       : ok

Loop 4/5:
  Stuck Address       : ok         
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok         
  Block Sequential    : ok         
  Checkerboard        : ok         
  Bit Spread          : ok         
  Bit Flip            : ok         
  Walking Ones        : ok         
  Walking Zeroes      : ok         
  8-bit Writes        : ok
  16-bit Writes       : ok

Loop 5/5:
  Stuck Address       : ok         
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok         
  Block Sequential    : ok         
  Checkerboard        : ok         
  Bit Spread          : ok         
  Bit Flip            : ok         
  Walking Ones        : ok         
  Walking Zeroes      : ok         
  8-bit Writes        : ok
  16-bit Writes       : ok

Done.


On Sun, Nov 5, 2017 at 5:16 AM, Michael Below <below@judiz.de> wrote:
Hey,
just a tip: this might also be a matter of bad RAM, try a memory test.
Cheers
Michael

Am 4. November 2017 21:31:13 MEZ schrieb Michael <bmike1@gmail.com>:
As I run darktable it seems to suddenly reboot my system. I almost said crash but I guess it is a mini crash. Last time this happened I ran it about 15 minutes. I edited one image and moved on to the next when suddenly it goes 'poof'. As it warms up it happens more frequently so I was thinking it was my video card. 'sensors' said (after the reboot):

bmike1@MikesBeast ~ $ modprobe k10temp
bmike1@MikesBeast ~ $ sensors
radeon-pci-0100
Adapter: PCI adapter
temp1:        +66.0°C  

it8718-isa-0228
Adapter: ISA adapter
in0:          +1.46 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +1.94 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.25 V  (min =  +0.00 V, max =  +4.08 V)
+5V:          +2.99 V  (min =  +0.00 V, max =  +4.08 V)
in4:          +3.10 V  (min =  +0.00 V, max =  +4.08 V)
in5:          +3.25 V  (min =  +0.00 V, max =  +4.08 V)
in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)
in7:          +2.35 V  (min =  +0.00 V, max =  +4.08 V)
Vbat:         +3.15 V  
fan1:        3139 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +35.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +51.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode
temp3:        +52.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:    +1.050 V
intrusion0:  ALARM

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +48.8°C  (high = +70.0°C)
                       (crit = +72.0°C, hyst = +70.0°C)


Is darktable known to crash... reboot a system? As I was saying I was thinking it was my video card. Is there something I need to do to access the video card?

:-)~MIKE~(-:

____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscribe@lists.darktable.org
=

____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscribe@lists.darktable.org



--
:-)~MIKE~(-: